Vibration Monitoring System

Tenor: 8 - CH Datalogger Acquisition System
The Tenor Data Logger is an 8-channel data system that provides accurate measurement of acoustic and vibration. It is based on the principle of Digital Signal Processing (DSP) and allows accomplishment and storage 8 channels on a PC. For this process, it uses high speed USB 2 link.

Hardware Technical Data

• Sampling rate up to 43 kHz per channel for 8 channels


• SNR: 85 dB (input) and 88 dB (output)


• Dynamic range: 110 dB


• 4 input types: Direct DC, Direct AC, ICP and Electret


• Input dynamic range (+/-25 mV to +/-5 V)


• 8 independent programmable analog outputs with LED status


• Output dynamic range (+/-2V)


• Anti-aliasing filter on outputs and inputs


• BNC connector with LED status for each input and ouput


• 24Volt-0,5A External AC/DC power supply included


• Dimensions (WxHxD): 77 x 217 x 274 mm (3 x 8 1/2 x 10 3/4 inches)


• Weight: 2.4 kg (5.2 lbs)

• Data-logging in a standard .wav file format


• Sensor calibration module and management of a sensor bank


• Real time dynamic and saturation monitoring of 8 input channels


• Real time monitoring of input and output signals (time signal, global levels historic and average Sxx)


• Complete post-processing module


• Wave file generation module

From in-vehicle order tracking to MIMO analysis In-vehicle Real-time Noise & Vibration Analyzer

• Compact-True ISO A4 Size (210 x 297mm)


• 24-bit ADC


• Real-time Octave Analysis


• Throughput Acquisition to Disk (standard)


• Powered by DC, AC or Backup Battery


• Dynamic Range 100dB


• Multi Taco Input


• Multi-Input Multi-Output (MIMO) Analysis (standard)

Features

• Piezoelectric Sensor, 0.35 Hz to 10,000 Hz


• Response Selectable ± 5 or ± 50 g's full scale range


• Single Axis Sample Rate up to 40 KHz Sample


• Count up to 65,000


• Standard Temperature: -5º F to 125º F


• 2.5” x 1.5” diameter Battery life >1.5 years when taking an 800 line FFT once per hour 250 ft. line of sight distance between NAP and Sensor (Wireless Repeater can extend distance or coverage)

• Five Standard Temperature Wireless Accelerometers


• Five Standard Temperature Batteries


• One Wireless Network Access Point


• Software


• One Ethernet Crossover Cable


• One Installation Manual

We offer hand held vibration meters for measuring vibration, velocity, displacement and acceleration. Small in size, these meters include transducer and powered with battery. These are optional for inner or external accelerometer. These meters are easy to use and both power and measurement can be controlled with a single button.

Salient Features:

• Measuring vibration velocity, displacement and acceleration.


• Small size, transducer included, battery powered, no other component required.


• 3 1/2 LCD digital display, sampling per second.


• One button control both power and measurement. Very easy for use.


• Optional for inner or external Accelerometer.


• Automatic power off.


• Holding function.


• Suitable for monitoring machinery vibration caused by out-of-balance, misalignment, gear damage, bearing faults and etc.

Salient Features: